HYPERION
40V HALF-BRIDGE GATE DRIVER
HYPERION is suitable for driving MOSFETs in DC-DC converters and for half-bridge gate driver designs in electric motor control applications and power inverters. With a typical on-resistance of 1 Ohm, both high-side and low-side can drive up to 1 nF loads with a 40 ns propagation delay and 15 ns transition time at 200°C. Internal, adaptive non-overlap circuitry further reduces switching losses by preventing simultaneous conduction when used in MOSFET drive applications. The high-side floating driver is bootstrapped and can accommodate voltages as high as 55V on the bootstrap node. An under-voltage lockout function holds the high-side switch off until the driver has sufficient voltage for proper operation. A crowbar input turns on the low-side driver independently of the input signal state, and a low-side disable pin allows operation in non-synchronous mode. A shut-down pin turns off both the high-side and the low-side drivers.
Status: Last Time Buy
Key features
- Temperature range: -55°C to 225°C
- Floating High-side driver sustains boost voltages of up to 50 V
- Fast rise and fall times
- Output peak current in excess of 1A
- Integrated High-Side Bootstrap Diode
- Under voltage lockout (UVLO)
- Adaptive non-overlap circuit
- Digital control:
- Output enable control
- Low-side driver disabling
- Crowbar control
- Available packaging: ceramic SOIC28 and bare die
Applications
DC-DC Converters and Electric Motor Control for Oil&Gas, Industrial, Aerospace & Automotive.
Ordering information
| Ordering reference | Description | Package | Status | Link |
| CHT-HYPERION-CDIL28-T |
Driver (HS&LS, half bridge) |
Ceramic DIL28 | Last Time Buy | See LTB details |
| CHT-HYPERION-CSOIC28-T |
Driver (HS&LS, half bridge) |
Ceramic SOIC28 | Last Time Buy | See LTB details |