The CHT-SNMOS-80 is a high voltage 80V N-channel small-signal MOSFET designed to achieve high performance in an extremely wide temperature range: typical operation temperature goes from -55°C to 225°C.
Status: Last Time Buy
LTB Details
The CHT-ELARA is a high temperature 80V/500mA quad diode in a hermetically sealed TDFP16 ceramic package. It is designed to achieve high performance in an extremely wide temperature range: typical operation temperature goes from -55°C to 225°C while keeping leakage currents low.
CHT-CALLISTO features high temperature dual common anode 80V / 300mA diodes packaged in a hermetically sealed TO18 metal can. It is designed to achieve high performance in an extremely wide temperature range: typical operation temperature goes from -55°C to 225°C while keeping leakage currents low. This dual diode can be used in a variety of applications, including rectification and general purpose.
The CHT-GANYMEDE is a high temperature dual series 80V / 300mA diode in a hermetically sealed TO18 metal can package. It is designed to achieve high performance in an extremely wide temperature range: typical operation temperature goes from -55°C to 225°C while keeping leakage currents low. This dual diode can be used in a variety of applications, including rectification, clamping and general purpose.
The CHT-AMATHEA is a Medium Power 80V/3A dual-diode designed to achieve high performance in an extremely wide temperature range: typical operation temperature goes from -55°C to 225°C. 3 product flavours are available: Common Anode Common Cathode Dual Series The CHT-AMALTHEA is available in a metal can TO-257 package.
STROMBOLI® is CISSOID’s technology allowing to build High Temperature, High Efficiency Isolated DC-DC Converters on the basis of CISSOID’s chipset MAGMA & HYPERION and CISSOID's Power FETs from the PLANET Family.
The CHT-VOLGA is a single high-speed comparator with a normal operating temperature range -55°C to +225°C. The device operates from a single +5V±10% power supply, with rail-to-rail input / output.
The CHT-ADC10 is a high-temperature, ultra-low-power, highly stable analog-to-digital converter. This successive approximation ADC is based on an R-2R network and features 10 bits of resolution and a strictly monotonic characteristic from -55°C up to +225°C. An optional internal clock generator is included to provide standalone operation. It includes Sample&Hold and µP interface with possibility of serial data transfer. The maximum sampling rate is 25kS/s.
The CMT-VOLGA is a single high-speed comparator with a normal operating temperature range -55°C to +175°C. The device operates from a single +5V±10% power supply, with rail-to-rail input / output.
The CHT-OPA is a general-purpose quad operational amplifier for applications over the temperature range from -55 to 225°C. The CHT-OPA can operate with both single and symmetrical power supplies. The supply voltages range goes from 4.5 to 20V.
CHT-OPAL is an ultra high-precision, dual operational amplifier designed for applications that require very low offset and very low noise. Key features include single 5V nominal power supply and rail-to-rail inputs and outputs. Best-in-class precision on the full temperature range -55°C to +225°C encompasses low input offset (internally compensated) and low noise. The internal circuitry uses a clock that is internally generated. There is a spread-spectrum mode for this clock.
The CHT-RUBY is a general-purpose triple operational amplifier combined with a bandgap voltage reference for applications with an operating temperature range of -55to 225°C. The three operational amplifiers can be configured in an instrumentation amplifier with external resistors, while the built-in voltage reference provides complete bridge excitation for sensor applications. The total precision (absolute plus temperature drift) of the voltage reference is better than 2%.
The CMT-OPA is a general-purpose quad operational amplifier for applications over the temperature range from -55 to 225°C. The CHT-OPA can operate with both single and symmetrical power supplies. The supply voltages range goes from 4.5 to 20V.
The CHT-555 is a high-temperature, low-power, highly stable device for generating accurate time delays or oscillations, with enhanced capabilities compared to the well known NE555.
The CG50LP is CISSOID’s 2nd generation clock generator IC. It combines the unrivalled robustness of its predecessor device CG50, while bringing additional features, lower pin count and ~40% current consumption reduction (compared to CG50). The CG50LP is a high-temperature crystal clock Generator integrated circuit that features a built-in frequency divider selectable from 1 to 512, an enable/disable control signal and an external clock input. Its output driver capability is programmable (8/16mA) as well as the crystal driver strength. Using an external crystal, it brings reliable precision performance throughout the -55 to +225°C temperature range, as well as unrivalled lifetime at any temperature within this range.
The CXT-741G58 is a high temperature configurable device enabling 10 different logic functions: 2-Input NAND, 2-Input OR with Both Inputs Inverted, 2-Input AND with A Input Inverted, 2-Input NOR with B Input Inverted, 2-Input AND with B Input Inverted, 2-Input NOR with A Input Inverted, 2-Input OR, 2-Input NAND with Both Inputs Inverted, 2-Input XNOR, Buffer. This device is optimized for automotive applications and specificied for operating junction temperature from -40°C up to +175°C (Tj), in excess of AEC-Q100 (Grade 0) qualification standard.
CHT-74xx Logic Family is optimized for High-Temperature, High Reliability applications. It brings digital functions to system designers targeting high temperature electronics, up to +225°C. The CHT-7400 contains 4 independent high-temperature 2-input NAND gates. It can operate with supply voltage from 3V to 5.5V.
The CXT-741G97 is a high temperature configurable device enabling 9 different logic functions: Inverter, 2 to 1 Multiplexer, 2-Input AND, 2-Input NOR with Both Inputs Inverted, 2-Input OR with A Input Inverted, 2-Input NAND with B Input Inverted, 2-Input NOR with B Input Inverted, 2-Input AND with A Input Inverted,2-Input OR. This device is optimized for automotive applications and specificied for operating junction temperature from -40°C up to +175°C (Tj), in excess of AEC-Q100 (Grade 0) qualification standard.
The CXT-741G175 is a high temperature positive-edge triggered D Flip-Flop gate. This device is optimized for automotive applications and specificied for operating junction temperature from -40°C up to +175°C (Tj), in excess of AEC-Q100 (Grade 0) qualification standard.
We use cookies to provide you a better user experience on this website. Cookie Policy